Pipe production: Custom iron pipe machine

Iron pipe machine is one of the important mechanical equipment sold by our factory. This article mainly introduces the operation method of iron pipe machine.
1. Preparation
1. Determine the specifications and materials of the processing pipeline, and choose the appropriate pipe making machine.
2. Clean the table and feeder of the pipe making machine to ensure that there are no impurities, chips, etc.
3. Check the power supply line and air circuit of the pipe making machine to ensure normal power supply and unblocked air circuit.
2. Start operation
1. Open the power switch and air source switch of the pipe making machine to ensure that the power and air source are turned on.
2. Open the processing software to check and initialize the system to ensure that the system runs normally.
3. Click the program loading button to load the pipeline program to be processed.
3. Adjust parameters
1. Adjust the feeder to ensure that the pipe can enter the pipe making machine stably for processing.
2. Adjust the cutting tool to ensure that the Angle and distance between the cutting tool and the processing pipe are appropriate.
3. Adjust the processing speed and pressure to ensure the processing efficiency and pipe quality of the pipe making machine.
Four, processing pipe
1. Put the pipe into the feeder, press the start button, and the pipe making machine starts processing.
2. During the processing, observe the operation state of the pipe making machine and pay attention to processing quality and safety issues.
3. After the processing is completed, stop the processing operation of the pipe making machine and take out the processed pipe.
The above is the operation method of the iron pipe machine, I hope this article can provide readers with a reference, so that they can master the use of the pipe machine skills, improve the processing quality and efficiency.