Custom Steel Tube Forming Equipment

The mechanical principle of steel pipe production is through the use of steel coil tube core, welded and fused and formed. The process of making steel pipes is mainly divided into two kinds, that is, the general melting joint and the tube melting joint of boiler steel. When the steel plate is rolled, it is necessary to roll and bend the inner and outer edges at the same time, so that the tube core can meet the required shape and size requirements.

The production process of steel pipe production is divided into steel plate cutting, forming, welding and trimming and other steps, of which molding is the most critical step. The specific steps are as follows:

1. Steel plate cutting: The steel plate is cut according to the size and shape of the steel pipe.

2. Molding: Roll the cut steel plate. This step requires a crimping operation with a forming machine in order to roll the sheet into the desired shape and size.

3. Welding: The formed steel pipe is connected by the welding process of the internal and external welding machine.

4. Trimming: cutting and trimming the welded steel pipe to achieve the required size and shape.

The following processes and precautions need to be paid attention to in the process of steel pipe production:

1. The cutting of the steel plate should ensure the precision of the cutting dimension and the quality of the plate.

2. Suitable molding machinery needs to be used when forming, and the inner and outer edges of the plate need to be pre-bent during the rolling process to ensure that the finished product meets the required shape and size.

3. When welding, it is necessary to use the appropriate welding process, and consider the impact of the heat generated by welding on the plate to avoid unnecessary deformation and damage.

4. In the process of steel pipe production, strict inspection and control are required for each link to ensure that the finished product meets the requirements.

Steel pipe production belongs to the mechanical category and needs to be completed with appropriate machining and welding techniques. The process of making steel pipes needs to pay attention to the process and precautions to ensure that the finished product meets the required shape and size.